Pentair 6600 Manuel D'utilisation page 25

E
N
G
L
I
S
H
7.5
to
7.10
24
7 - BASIC PROGRAMMING MODE
6700 / 6765
REGENERATION CYCLE PROGRAMMING
The cycle 6 will not be viewed if the cycle 5 is cancelled
Press the button . The next displays are part of a series of option settings used to program the regeneration
cycles. Up to 6 cycles can be programmed. A led identifies only the 4 first cycles. Each display is used to set
the duration time (in minute) of each regeneration cycle.
The first display in the series is regeneration cycle 1, example: Backwash
Ex.: - Cycle 1 (Backwash): 8 minutes
- Cycle 4 (Brine refill): 8.4 minutes (8 min and 24 s.)
ExITING BASIC PROGRAMMING MODE
Press once again the button. the electronics returns in service.
6600 – 6665 – 6700 – 6765
[5 --- O F F ]
[1 - - - 8.0]
[4 - - - 8.4]