Cooke & Lewis CLFDT60 Mode D'emploi page 12

Use
Utilizare
03
Setting warning alarm
• You have the possibility to set a timer to remind you to turn on the oven.
• You can also use this function as a kitchen timer to set a time frame for other tasks not necessarily related to this oven.
• An independent audible signal that can be set to a maximum time of 23 hours and 59 minutes. To set the time, press "F" once.
The alarm indicator will flash for 5 seconds, during which time we can select the required time by pressing "-" and "+". The
countdown will start immediately.
• At the end of the time, the indicator will flash and an intermittent sound signal will be triggered, which can be interrupted by
pressing "-", "+" or "F".
• If it is not stopped, it will do so automatically after 2 minutes.
• To adjust the alarm time, press "F" once and repeat the above process. To cancel, press "F" and then "-" until the alarm timer
becomes zero.
Note! The warning alarm does not control any of the oven functions.
04
Setting Semi-automatic
(A) as per cooking time
• This function is used to cook in the desired time range (up to 10 hours).
• Before using this function, ensure to: Place the food into the oven first, Set the desired cooking function and temperature.
• By pressing "F" twice, set the cooking time using "-" and "+". The cooking will start immediately and appear on the
the end of the set time, the cooking will be interrupted and the intermittent sound signal will be heard. Cancel it as indicated above.
(B) as per cooking end time
• This function is used to cook in the desired end time (up to 10 hours).
• Before using this function, ensure to: Place the food into the oven first, Set the desired cooking function and temperature.
• By pressing "F" three times, set the chosen cooking end time using "-" and "+". The cooking will start immediately and appear
on the indicator.
• When the cooking time ends, the cooking will stop and the intermittent sound signal will be heard. Cancel it as indicated above.
• To adjust the setting, press "F" three times and repeat the above process.
• To cancel, press "F" three times and then press "-" until the cooking end time is the same as the clock time.
Note! that the oven will continue to work after the end of the cooking process and when
the alarm has been stopped. It must be turned off manually.
05
Setting Automatic cooking
This function is used to cook for a certain duration and stop at a certain end time. Before using this function, ensure to: Place the
food into the oven first.
Start and end of cooking:
1. Programme the cooking time by pressing "F" twice and selecting the required time with "-" and "+".
2. Set the end of the cooking time by pressing "F" 3 times and selecting the required time with "-" and "+"
3. Select the required temperature and function using the thermostat controls and selector.
After these operations, the
programmed.
Practical example:
We want to cook for 45 minutes and for the cooking to end at 2 p.m.
1. We press "F" twice and select 0.45 by using "-" and "+"
2. We press "F" three times and select 14.00 with "-" and "+"
3. After these operations, the current time will reappear on the display and the
has been memorised.
4. At 1.15 p.m. (2 p.m. less 45 minutes), the oven will start automatically.
5. At 2 p.m. the cooking will stop automatically and the intermittent sound signal will be heard.
6. We can switch it off by pressing any button.
Utilisation
Uso
(Can use one of the following method.)
and indicators will continue to be shown on the display, showing that the oven has been
Użytkowanie
and indicators will show that our programming
12
indicator. At