Hauff-Technik KES-M90-KB-Set Instructions D'installation page 7

KES-M90-KB-Set / KES-M150-KB-Set
Contents
1 General information and intended use
2 General notes/safety instructions/Legend
3 Description
4 Scope of delivery
5 Required tools and auxiliaries
6 Assembly
1 General information and intended use
With the KES-M90-KB-Set or KES-M150-KB-Set connection set for KB/conduits you can connect
Hatefl ex spiral hoses 14090 or 14150 to core drillings or conduits using a pipe socket. For sealing the
pipes in the wall, two press seals are provided.
2 General information
• The DIN standards and guidelines listed here are only valid in Germany. In all other
countries, the applicable versions of national standards and guidelines should be used.
• It is essential to observe the applicable country-specifi c standards and policies
for any drill work carried out as well as for clearances. This applies in particular
to waterproof concrete components in accordance with EN 206-1, modular
construction or working with self-compacting concrete.
• Further accessories and information are available at www.hauff-technik.de and
in the technical data sheets.
Safety instructions
• Check that all necessary components have been delivered and that they are not
damaged. You must not install damaged components.
• Drill work and building entry installation must comply with the relevant professional
association regulations, VDE provisions, national safety and accident prevention
regulations as well as company regulations (work and procedural instructions).
Legend
1
Work stages
Important information
1
Reference numerals in drawings
Art. Nr.: 5090032081 Rev.: 00/2017-12-01
EN
7