Hauff-Technik KES-M90-KB-Set Instructions D'installation page 10

KES-M90-KB-Set / KES-M150-KB-Set
Tighten the allen screws (AF 6) on the inside of the building
3
in a crosswise sequence until the torque of 5 Nm is reached
and the rubber emerges evenly from all inspection openings
(see fig.: 3 and 4).
Optical inspection:
The press seal is evenly pressed in as soon as the
rubber can be seen and felt in all inspection ope-
nings (see fig.: 4).
As work stage 3, but with installation from outside of buil-
4
ding (see fig.: 5).
If necessary, the casing tube on the outside of
building can be shortened .
Legend for fi g.: 5
1 Outside of building
Push connection sleeve KES-M90/HTV/KW/WE100 on
5
Hatefl ex hose 14090 until it stops (1.) (see fi g.: 6) and tigh-
ten clamping strap with AF13 to 5 Nm (see fi g.: 7).
Push connection sleeve WE-M160/R160/D/M on Hatefl ex
hose 14150 until it stops (1.) (see fi g.: 6) and tighten clamping
strap with AF13 to 10 Nm (see fi g.: 7).
Legend for fi g.: 6
1 Inside of building
2 Outside of building
10
Art. Nr.: 5090032081 Rev.: 00/2017-12-01
1
2
1
2.
EN
Fig.: 3
Fig.: 4
Fig.: 5
1.
Fig.: 6
Fig.: 7