Operation; Setting Alarm Limit; Automatic Child Lock - hager WXH20 Serie Mode D'emploi Et Instructions De Montage

e
- The device is only intended for use in private households and is not to be
used in conjunction with cookers and hobs as used in commercial kitchens.
- The device is to be used solely for monitoring electric cookers/hobs.
Product characteristics
- Sensor unit with status display via LED
- Display for low battery level via LED
- automatic child protection lock
- Connection for external water leakage sensor (optional, see Accessories)
- Connection for external signal generator via potential-free contact (option-
al, see Accessories)

4 Operation

Operating concept and display elements
In the event of an alarm, the device switches off the electric cooker, hob and in-
forms the user about the alarm situation via LEDs and acoustic signals. For this
purpose, the device has one battery status LED (7), one status LED (5), three
operating buttons (1 ... 3) and two sensors (4).
Colour of status LED (5) Acoustic
signal
green -
flashing red yes
slowly flashing red yes
slowly flashing blue yes
white No
purple-blue No
yellow-green No
flashing white
No
flashing red
Table 1: Meaning of status LED
28
Function
Cooker ready for use
Hazardous situation
Power supply to cooker interrupted
Water leakage alarm (optional)
Setting mode 1
Setting mode 2
Setting mode 3
Setting mode 4 (normal AUX mode)
Setting mode 4 (reversed AUX mode)
Colour of battery status LED (7)
flashing red
flashing red
Table 2: Meaning of the battery status LED
To avoid false alarms, we recommend:
- wiping the sensor unit with a damp cloth and mild cleaning agent periodi-
cally
- leaving the sensor unit in its position and avoiding unintended movement

4.1 Setting alarm limit

The default setting is to be used for the initial setup. The alarm limit can be
adjusted to the respective environment in the kitchen to ensure optimum
functioning of the device. The alarm limit can be adjusted if false alarms occur
frequently (see Manual Settings). To do this, set the alarm limit two levels high-
er or lower (maximum) as recommended

4.2 Automatic child lock

The automatic child lock is deactivated by default.
Switching on child lock
Keep the operation button (1) pressed for 5 seconds.
„
Two high acoustic signals (●●) sound and the status LED flashes green
twice. Child lock is switched on.
The automatic child protection is activated about 10 ... 60 minutes after finish-
ing cooking, in order to prevent the cooker/hob from being switched on acci-
dentally.
Switching off child lock
Keep the operation button (1) pressed for 5 seconds.
„
A low acoustic signal (●) sounds and the status LED flashes red.Child
protection is switched off.
Acoustic Function
signal
Battery charge too low, battery
yes
life still approx. 2 weeks.
Power supply to the cooker/hob is
- interrupted, LED flashes until the
battery is completely empty.
e
29