Use And Configuration; Displays And Configuration Elements - Balluff BOD 26K LB04-S115-C Instructions De Service Et De Montage

Connection Colour
1 (WH) White
2 (BN) Brown
3 (GN) Green
4 (YE) Yellow
5 (GY) Grey
6 (PK) Pink
7 (BU) Blue
8 (RD) Red
Once power supply has been connected, the BOD 26K is ready for operation after a short stand-by delay
(< 300 ms).
INFORMATION
For maximum precision, please allow for a heating period (approx. 15 minutes).
7

Use and configuration

The sensor has different operating modes and functions.
Sensor configuration can be carried out via the control panel using the
CAUTION
Push buttons only with finger! Do not use sharp objects!
With BOD 26K-LBR (with RS485 interface) it is also possible to adjust the sensor functions via the serial interface.
7.1

Displays and configuration elements

Keys and their functions:
The BOD 26K is configured using the
48
Use
RS485 Data+ (Y/A)
+ U
B
As signal output Q or input with optional input function (see
1
chapter 7 „Use and configuration")
As signal output Q or switching function "good target" (detec-
2
table object in measuring range)
RS485 Data- (Z/B)
Q + analogue measurement
A
- U
B
Q - analogue mass
A
SET and
SET
keys.
No. 834826 E Edition 1310; Replaces edition 1111; Subject to modification
Mounting and
operating instructions
Remark
LBR version only
LBR version only
and keys.