Commissioning
Parameter
Set
Sample
Creating Programs
Event Prog.
Sample
mode
Set
Distribution
Creating Programs
Event Prog.
Distribution
mode
Set
Switch
Creating Programs
Event Prog.
Distribution
Switch
Service
Set
Service
Service
118
Menu level
Time: Sampling acc. to time.
Quantity: Sampling acc. to quantity (connect quantity signal!).
Ext. Sig.: Sampling on external signal (assign signal input!).
Flow: Sampling acc. to flow (connect quantity signal).
Once: Single sample
Time: Bottle change after a specific time.
Number: Bottle change after a specific number of samples.
Ext. Sig.: Bottle change on external signal (assign signal input!).
No Change: No bottle change
Change: Bottle change for event sample
x Bottles: x bottles can be reserved by the switching program for
batching. These bottles then cannot be used by the main program.
General: Software name, software version, software option, CPU
number, preset*, view angle (contrast)*
Running Times: Displays the running times of the components and
devices
Unit Test: *Service code necessary!!
Calibration: Tap calibration and sample volume calibration
Pump service: Pump operation for change of pump hose
• Running times - tube: Operating time of hose pump since the last
reset
• Running times - limit: When the target operating time is achieved,
the warning 'CHANGE HOSE' appears on the display
Operating structure for multi-parameter probes (optional)
Menu structure:
Fig. 58:
Operating structure for multi-parameter probes (optional)
Setting options
ASP station 2000 peristaltic
Factory setting
Time
Time
No Change
-
Endress+Hauser