Endress+Hauser ASP Station 2000 peristaltic Manuel D'utilisation page 117

ASP station 2000 peristaltic
Parameter
Creating Programs - Main Programs
Set 
Sample
Creating Programs 
Program 1,2,3,4 
Sample 
mode
Set 
Distribution
Creating Programs 
Program 1,2,3,4 
Distribution 
mode
Set 
Program Start
Creating Programs 
Program 1,2,3,4 
Start-stop
Set 
Program Stop
Creating Programs 
Program 1,2,3,4 
Start-stop
Set 
Operation
Creating Programs 
Program 1,2,3,4 
Start-stop
Set 
Synchronization
Creating Programs 
Program 1,2,3,4 
Synchronization
mode
Creating Programs - Switching Programs
Set 
Switch
Creating Programs 
Switch 1,2
Set 
Sample
Creating Programs 
Switch 1,2
Sample 
mode
Set 
Distribution
Creating Programs 
Switch 1,2
Distribution 
mode
Creating Programs - Event Program
Set 
Event Prog.
Creating Programs 
Event Prog.
Endress+Hauser
Menu level
Time: Sampling acc. to time.
Quantity: Sampling acc. to quantity (connect quantity signal!).
Ext. Sig.: Sampling on external signal (assign signal input!).
Flow: Sampling acc. to flow (connect quantity signal).
Time: bottle change after a specific time.
Number: bottle change after a specific number of samples.
Ext. sig.: bottle change on external signal (assign signal input!).
Aut Button: Program started when Aut button is pressed;
Time: Start the program at a settable time.
Prog. End.: Program end on completion of the set program.
Time: Program end after settable time.
No: Continuous operation
Continuous: Continuous operation;
Day: Operation at 2 settable times per day.
Week: Operation on 3 settable days per week.
Interval: Settable operating duration in settable intervals.
Aut Button: When the Aut button is pressed, the program is started
without synchronization. The current bottle when the program is
started is Bottle 1 and the time for the next sample is calculated from
the time the Aut button is pressed.
Time: Sampling times and bottle change are synchronized.
Time+Bot: Synchronization of sampling and distribution. Fixed times
are assigned to the bottles.
Sample: Sampling type in the switching program.
Distribution: Distribution mode for the switching program.
Time: Sampling acc. to time.
Quantity: Sampling acc. to quantity (connect quantity signal!).
Ext. Sig.: Sampling on external signal (assign signal input!).
Flow: Sampling acc. to flow (connect quantity signal).
Time: Bottle change after a specific time.
Number: Bottle change after a specific number of samples.
Ext. sig.: Bottle change on external signal (assign signal input!).
Sample: Sampling type in the event program
Distribution: Distribution mode for the event program
Setting options
Commissioning
Factory setting
Time
Time
Aut Button
Prog. end
Continuous
Aut Button
-
Time
Time
-
117