Hanging The Heater - L.B. White L-40 Mode D'emploi

18
L-40 / H-40
L-40 / H-40 Spark Ignition Radiant Brooder

Hanging the heater

■ Heater shall be hung with 1 inch tilt angle
from front of heater to gas control after
attaching gas hose and connecting the
electrical supply.
■ Gas hose and all electrical wiring shall be
installed out of the hot zone above heater.
■ Maintain proper clearance to combusti-
bles as shown on page 4 - specifications.
FIG. 16
CORRECT
1 in. tilt
angle
FIG. 17
INCORRECT
Owner's Manual • L-40 / H-40