11
L-40 / H-40 Spark Ignition Radiant Brooder
STEP 6 - ORIFICE HOLDER AND AIR INLET PLATE
To remove the air inlet plate from the burner.
• Pivot the latch handle 90 degrees clockwise to release the air inlet plate.
To attach the air inlet plate to the burner.
• Position the air inlet plate to the burner base.
• Align the air inlet plate slots and the latch handle tabs.
• Pivot the latch handle 90 degrees counter clockwise securing the air inlet plate to the burner.
Owner's Manual • L-40 / H-40