Adjustment - Sunrise Medical JAY Shape Back Back Manuel D'utilisation

ENGLISH

ADJUSTMENT

To adjust the tension of the JAY Shape Back:
• Lift up the back cover flap to expose the horizontal
straps.
• Adjust each strap individually to the desired tension.
• Fold down the back cover flap over the horizontal
adjustment straps to complete your adjustment.
NOTE: You may adjust the JAY Shape Back while the
user is seating on the chair.
•
CAUTION!
AVOID over-tightening of the strap assembly as this may
cause damage to the integrity of the back canes.
Installing the lateral supports:
1. Determine the desired location of the lateral supports
on the back tubes, (Fig.5.0).
2. Attach and align receiver on the back tubes,
(Fig.5.0).
3. Repeat the process for the second lateral support if
applicable.
4. Install the back cane covers and open the zippers
to leave space for the lateral supports accordingly,
(Fig.6.0).
5. To adjust the angle of the lateral supports, unscrew
the bolts as described in the picture, (Fig.7.0).
JAY Shape Back
5
ADJUSTMENT
Fig.5.0
Fig.6.0
Fig.7.0
EU = REV.1.0