Tuthill FILL-RITE PORTABLE RD Serie Mode D'emploi page 12

Safety Testing Information
The following standards were used to show compliance in North America:
UL 674 – Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations, 5th Edition. The
following standards were used to show compliance in the European Union:
Directive 2014/34/EU – Equipment and protective systems intended for use in potentially
explosive atmospheres.
EN 60079-0:2012 Explosive atmospheres – Part 0: Equipment – General requirement.
EN 60079-1:2014 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d".*
IEC 60079-0 Explosive atmospheres – Part 0: Equipment – General requirements, 6th Edition.
IEC 60079-1 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d", 7th Edition. Directive
2006/42/EC – Directive on machinery.
EN 809:1998 +A:2009 – Pumps and pump units for liquids – Common safety requirements.
EN ISO 12100:2010 – Safety of Machinery – Basic concepts, general principles for design.
Directive 2004/108/EC – Electromagnetic compatibility.
Directive 2011/65/EU – Restrictions of the use of certain hazardous substances in electrical and electronic
equipment.
*The minimum and maximum values of the flameproof joints differ from what is specified in Table 2 of
EN60079-1:2014. Manufacturer is to be contacted for information on the dimensions of the flameproof joints.
*The fasteners used to secure the steel can to the aluminum housing have a yield strength of 1100MPa.
USA
www.fillrite.com
DC001582-000 Rev.5
12