B.A. International BA ULTIMATE POWER + Notice D'utilisation page 30

6401553.book Seite 28 Montag, 10. September 2012 2:27 14
5 Operation
D
E
F
28
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
4. Clamp the bur instrument by turning the center part of the handpiece in
direction (D) up to the stop.
 When the two marks (E) are located opposite each other, the bur
instrument is clamped.
 When using handpiece bur instruments with detached shaft:
ensure that the detached shaft is not lying against the chuck
opening (F).
5. Then pull and turn the bur instrument to check that it is firmly seated.
Removing the pin
1. Screw in the supplied tool (A).
2. Open the clamping system.
A
3. Pull out the pin.
64 01 553 D3551.201.03.01.02