B.A. International BA ULTIMATE POWER + Notice D'utilisation page 29

6401553.book Seite 27 Montag, 10. September 2012 2:27 14
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
A
B C
64 01 553 D3551.201.03.01.02
Contra-angle handpiece bur instrument
✔ The motor has come to a stop.
1. Insert the bur instrument without pressing the pushbutton.
2. Turn the bur instrument back and forth gently until it snaps into place.
3. Then pull and turn the bur instrument to check that it is firmly seated.
Removing the contra-angle handpiece bur instrument
✔ The bur instrument has come to a stop.
➢ Remove it while pressing and holding down the pushbutton.
Inserting the handpiece bur instrument
✔ The motor has come to a stop.
1. Turn the center part of the handpiece in the direction of the arrow (A) up to the
stop.
2. When using the contra-angle handpiece bur instrument (C): insert the pin (B)
into the handpiece, with the slotted end first. The pin compensates for the
difference in length between straight and contra-angle handpiece bur
instruments.
3. Insert the bur instrument as far as it will go.
5 Operation
27