Grundfos MAGNA3 32-60 F Notice D'installation Et De Fonctionnement page 52

"Set date and time"
Navigation
"Home" > "Settings" > "General settings" > "Set date and time"
This menu offers the following options:
• Select date format
• Set date
• Select time format
• Set time.
Setting the date
1. Choose "Select date format" with
Choose either "YYYY-MM-DD", "DD-MM-YYYY" or
"MM-DD-YYYY".
2. Press to return to "Set date and time"
3. Select "Set date" with or
4. Select digit with and and adjust with
5. Press [OK] to save.
Setting the time
1. Choose "Select time format" with
Choose either "HH:MM 24-hour clock" or "HH:MM am/pm
12-hour clock".
2. Press to return to "Set date and time".
3. Select "Set time" with or
4. Select digit with and and adjust with
5. Press [OK] to save.
52
or and press [OK].
and press [OK].
or .
or and press [OK].
and press [OK].
or .
"Units"
Navigation
"Home" > "Settings" > "General settings" > "Units"
This menu offers the following options:
• SI or US units
• Customised units.
In this menu, you can select between SI and US units. The setting
can be made generally for all parameters or customized for each
individual parameter:
• Pressure
• Differential pressure
• Head
• Level
• Flow rate
• Volume
• Temperature
• Differential temp.
• Power
• Energy.
Setting, general
1. Select "SI or US units" with
2. Choose either SI or US units with
Setting, customized
1. Select "Customised units" with
2. Select parameter and press [OK].
3. Select unit with or . Press [OK].
4. Return to parameters with
If you have selected SI or US units, the customized units are
reset.
or and press [OK].
or and press [OK].
or and press [OK]
. Repeat steps 2-4 if necessary.