Final Assembly - Luminance Brands Kathy Ireland Home HIGHPOINTE LED Manuel Du Propriétaire

6.1
Engage the Fan Motor Blue Wire Connector into the
LED Light Fixture Assembly Black Wire Connector
(Figure 26).
Engage the Fan Motor White Wire Connector into the
LED Light Fixture Assembly White Wire Connector
(Figure 26).
The connections are complete when you hear a soft
click.
6.2
Remove and Retain the Three #8-32 x 3/8" Pan Head
Screws from the Lower Housing.
Carefully tuck all the Wires and Connectors into the
Lower Housing.
Position the LED Light Fixture Assembly onto the Lower
Housing, aligning the Three Holes.
NOTE: Verify that the wires and connectors are not
trapped between the LED Light Fixture Assembly
and the Lower Housing.
Reinstall and tighten the Three #8-32 x 3/8" Pan Head
Screws to complete the assembly of the LED Light
Fixture Assembly (Figure 27).
A spare #8-32 x 3/8" Pan Head Screw supplied in parts
bag, if needed.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Lower Housing and the LED Light Fixture
Assembly.

6. Final Assembly

FAN MOTOR
BLUE WIRE CONNECTOR
FAN MOTOR
WHITE WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
WHITE WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
BLACK WIRE CONNECTOR
Figure 26
LED LIGHT FIXTURE
ASSEMBLY
Figure 27
17
LED LIGHT FIXTURE
ASSEMBLY
LOWER HOUSING
#8-32 x 1/4" PAN HEAD SCREWS
WITH LOCKWASHERS (3)
#8-32 x 3/8" PAN HEAD
SCREWS (3)
Please contact 1-800-777-4440 for further assistance
luminancebrands.com
U.L. Model No.: CF205L-1