Luminance Brands Kathy Ireland Home HIGHPOINTE LED Manuel Du Propriétaire page 24

8.6
The Light Push Button (
OFF and controls the Light Intensity (Figure 39).
To vary the intensity of the Light, hold the
Light Button ( ) down until the desired Light Intensity
is reached, then release the Button (Figure 39).
NOTE: When turning the light on, light will turn on
at the light intensity previously selected.
Your Remote Control has full control of your Fan and
Light.
The Power Indicator Light (blue glow) will Illuminate
while any Button is pressed, indicating that the Battery
is good.
) turns the Light ON and
POWER INDICATOR
LIGHT
LIGHT BUTTON
Figure 39
COVER
WALL
BRACKET
SCREWS (2)
Figure 41
24
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
U.L. Model No.: CF205L-1