Luminance Brands Kathy Ireland Home HIGHPOINTE LED Manuel Du Propriétaire page 8

3. Ceiling Fan Assembly
3.11
Remove and Retain the Three Lower Decorative Rod
Screws, located in the Motor Housing.
Position the Three Decorative Rod Assemblies onto the
Motor Housing (Figure 10).
The Decorative Rods must be oriented so that they
lean in towards the 12" Downrod.
Reinstall the Three Lower Decorative Rod Screw.
Do not tighten the Rod Screws at this time.
3.12
Remove and Retain the Three Upper Decorative Rod
Screws, located in the Rod Support Assembly.
Slide the Rod Support Assembly up the 12" Downrod
until the threaded holes in the Rod Support align with
the holes in the Decorative Rod Assemblies (Figure 11).
Secure the Decorative Rods to the Rod Support by
reinstalling the Three Decorative Rod Screws; do not
tighten the Rod Screws at this time.
Rotate the Rod Support Assembly until the Decorative
Rod Assemblies are aligned vertically with the
12" Downrod (Figure 11).
Hold the Rod Support in this position while tightening all
Six Decorative Rod Screws securely.
(Continued)
DECORATIVE
ROD ASSEMBLY
LOWER
DECORATIVE ROD
SCREWS (3)
Figure 10
12" DOWNROD
UPPER
DECORATIVE ROD
SCREWS (3)
DECORATIVE
ROD ASSEMBLY
Figure 11
8
12" DOWNROD
MOTOR
HOUSING
ROD
SUPPORT
ASSEMBLY
U.L. Model No.: CF205L-1