6.1
Screw the Two Threaded Studs (supplied) into the Tapped
Holes in the Hanger Bracket (Figure 20).
6.2
Lift the Ceiling Cover up to the Threaded Studs and turn
until Studs protrude through the Holes in the Ceiling Cover
(Figure 21).
Secure the Ceiling Cover in place by sliding a Lockwasher
(supplied) and installing a Knurled Knob (supplied) over each
threaded stud (Figure 21).
Tighten the Knurled Knobs securely until the Ceiling Cover fits
snugly against the ceiling and the Hole in the Ceiling Cover is
clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
You have now completed the assembly of your new Ceiling
Fan.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and operation of
this Ceiling Fan.
6. Final Assembly
Figure 20
Figure 21
15
NOTE: CEILING COVER
OMITTED FOR CLARITY.
THREADED
STUDS (2)
Please contact 1-800-777-4440 for further assistance
CEILING COVER
THREADED STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
luminancebrands.com
U.L. Model No.: CF652