Luminance Brands Kathy Ireland Home HIGHPOINTE LED Manuel Du Propriétaire page 16

5. How to Wire Your Ceiling Fan
5.9
Position the Antenna Wire on top of the Receiver.
While inserting the Receiver fully into the Hanger Bracket,
turn Wires upward and carefully push Wires into the
Outlet Box, with the White and Green Wires on one side
of the Outlet Box and position the Black and Blue Wires
on the other side of the Outlet Box (Figure 24).
5.10
Wiring Schematic for reference (Figure 25).
BLACK
(HOT)
TO
120-VOLT
SUPPLY
WHITE
Figure 25
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW406 WALL CONTROL
GND
GROUND
TWO-CONDUCTOR
CABLE
(WITH GROUND)
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET
Figure 24
BLACK
BLACK
WHITE
WHITE
ANTENNA
BLACK or RED
BLUE
BLACK
BLUE
WHITE
HANGER BALL
16
(Continued)
WIRE
CONNECTORS
(Tucked Inside
Outlet Box)
RECEIVER
WHITE
U.L. Model No.: CF205L-1