Niko 65-410 Mode D'emploi page 74

65-410
Mode-LED's
These LEDs indicate the current mode of the dimmer (phase control or reversed phase control)
and how it was activated (automatically or manually). To set the mode: see '4.A.Selection of dim
principle mode'.
During normal operation, the 'mode' LEDs can indicate the following:
LED Status
100...1400VA
100...1400VA
Upper LED lights steadily.
100...1400VA
100...1400VA
Lower LED lights steadily.
100...1400VA
100...1400VA
Upper LED blinks.
100...1400VA
100...1400VA
Lower LED blinks.
Input LEDs
The following four modes of operation are possible: 0-10V analogue control; 1-10V analogue control;
single push button control or double push button control (see 4.B.Selection of mode of operation
input). The 'input' LEDs indicate which mode of operation has been selected.
74
Meaning
100...1400W
Current mode: reversed phase control, automatic
100...1400W
Current mode: phase control, automatic
100...1400W
Current mode: reversed phase control, manual
Load = incandescent lamp, low voltage halogen with
electronic transformer
100...1400W
Current mode: phase control, manual
Load = incandescent lamp, halogen 230V~, low voltage
halogen with ferromagnetic transformer.
ε
R,L,C
EN