Niko 65-410 Mode D'emploi page 72

ε
65-410
R,L,C
Mode 3: single push button control
In the single push button mode, input 1 and input 2 have different and independent functions. Input
1 functions as a single push button dim function, adjustable with or without memory. Input 2 allows
light scenes to be saved and recalled at any time.
Operation input 1 (terminals 3 - 4):
input 1 has a single push button dim function (fig.3).
Memory function:
The dimmer can be used with or without memory. The standard setting of the dimmer is single push
button mode with memory function. To set the dimmer without memory function, it is sufficient to
press the 'control' key for 10s. at max. light level. After 10s., the light will decrease from maximum
to 50% to indicate that the memory function is switched off. Release the push button immediately
after this change in light intensity. If the push button is not released immediately, there will be no
switchover from 'with memory' to 'without memory' or vice versa. Repeat the procedure to reactivate
the memory function. This function, as well as the last set light level, is stored in a non-volatile
memory. The settings will not be lost in the event of a power failure.
With memory function, the dimmer first switches on at the minimum light level. The dimmer then
switches on at the last set value.
With memory
Press briefly = switching on/off, 'on' at previous level
Keep pressing = dimming up/down
Keep pressing when dimmer is 'off" = dimmer dims up from 0%
When dimming up: dimmer stops at maximum value
When dimming down: dimmer stops 2s. at minimum value and then dims up.
A renewed (long) press reverses the dimming direction.
Without memory
When briefly switching when 'off', the dimmer always switches on at max.level. For the rest, it
operates in the same way as 'with memory'.
Operation input 2 (connection terminals 2 - 3):
Input 2 allows a light scene to be saved and recalled.
72 EN