Publicité
Les langues disponibles
Les langues disponibles
Transit on public roads
WARNING
It is prohibited to carry people and/or things on the
work vehicle.
Before any on-the-road driving remove all the trays
from the tray holder and clean the working parts and
the tires to remove any soil residues.
UN41-0537AN
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Check that the screws are correctly tightened.
4) Grease to all the unpainted parts.
English language
INFORMATION FOR USE
When transporting the work vehicle/tractor assembly,
the regulations of the highway code must always be
complied with.
Obligatorily, the three-point hitch must be secured with
the relative bars (A) to prevent the work vehicle swing-
ing against the tractor and the speed of travel must be
adjusted to prevent loss of control of the tractor.
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the foot to the ground (if featured) to guarantee
work vehicle stability.
29
6
Use and maintenance
Publicité
