Publicité
Les langues disponibles
Les langues disponibles
Seedling size
The table shows the type and size of seedlings that the work vehicle can plant.
C
D
B
A
UN41-0133NI
Plant spacing distance
The work vehicle plants seedlings with variable spacing
options.
Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
Declaration of conformity
CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 – BUDRIO (BOLOGNA) - ITALIA
hereby declares, under its own responsibility that the
planting machine in question, i.e. models
UNITRIUM/1, UNITRIUM/2, UNITRIUM DT/2,
UNITRIUM/3, UNITRIUM DT/3, UNITRIUM/4,
UNITRIUM DT/4, UNITRIUM/5, UNITRIUM DT/5,
UNITRIUM/6, UNITRIUM DT/6, UNITRIUM DT/7,
comply with the Essential and Health Safety Require-
Guards
WARNING
Never use the machine without the safety guards.
The work vehicle is fitted with guards covering the trans-
mission components to prevent accidental contact with
the moving parts.
The illustration shows the protective casings (A - B) in-
stalled on a planting unit.
The protective casings are fitted on all the planting units
of the work vehicle.
English language
TECHNICAL INFORMATION
Seedling size
C
D
A
B
For the range of possible spacing options, see "Adjusting
the plant spacing".
It is up to the tractor driver to assess the environmen-
tal conditions of the work area and not to exceed the
weights allowed on the axles and the permitted gradi-
ents established for the tractor (see tractor user manu-
al).
ments provided for by Directive 2006/42/CE.
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
UN41-0415FL
7
min.
A (cm)
max.
min.
B (cm)
max.
min.
C (cm)
max.
min.
D (cm)
max
A
B
Use and maintenance
2
1,5
6
4
7
8
23
12
30
Publicité
