Device Description; Device General Description - magnetic MALLET Mode D'emploi

4.0. DEVICE DESCRIPTION

4.0. DEVICE DESCRIPTION

4.1. Device general description

4.1. Device general description
Magnetic Mallet is an electro-medical device for surgery and dentistry practice Magnetic Mallet is an electro-medical device for surgery and dentistry practice
with a double function according to the coupled part (handpiece O) : with a double function according to the coupled part (handpiece O) :
• •
OSTEOTOME version to obtain the bone plastic deformation thanks to the OSTEOTOME version to obtain the bone plastic deformation thanks to the
available forces and their application timing. available forces and their application timing.
• •
CROWN REMOVER version to obtain the crown and bridge removal from the CROWN REMOVER version to obtain the crown and bridge removal from the
abutment or the implant. abutment or the implant.
This device is basically made up by a control unit, a footswitch and two inter- This device is basically made up by a control unit, a footswitch and two inter-
changeable handpieces which can be used depending on the needed practice. changeable handpieces which can be used depending on the needed practice.
The control unit case is made by self-extinguishing plastic. On the control unit you The control unit case is made by self-extinguishing plastic. On the control unit you
can find: can find:
• •
The ON/OFF switch (C) The ON/OFF switch (C)
• •
Two different connectors. One for the footswitch and the other one for the Two different connectors. One for the footswitch and the other one for the
handpiece. The two connectors are identifiable by the following graphic sym- handpiece. The two connectors are identifiable by the following graphic sym-
bols: bols:
Handpiece metal connector (M) Handpiece metal connector (M)
► ►
Footswitch plastic connector (N) Footswitch plastic connector (N)
► ►
• •
Manual control push-button (E) Manual control push-button (E)
• •
Plastic knob to calibrate the level of the force (F) Plastic knob to calibrate the level of the force (F)
• •
Display showing the selected force (G) Display showing the selected force (G)
The control unit, the control/operational electronics together with the electronic/ The control unit, the control/operational electronics together with the electronic/
electric safeties are housed into the control unit case. electric safeties are housed into the control unit case.
The handpiece is powered by the control unit with a 58V c.c. maximum voltage. The handpiece is powered by the control unit with a 58V c.c. maximum voltage.
The handpiece is connected to the control unit by a cordset which can be manually The handpiece is connected to the control unit by a cordset which can be manually
unplugged. The handpiece can be activated by the pressure of both footswitch (L) unplugged. The handpiece can be activated by the pressure of both footswitch (L)
and manual control push-button (E). and manual control push-button (E).
Both for the OSTEOTOME and for the CROWN REMOVER function the force applied Both for the OSTEOTOME and for the CROWN REMOVER function the force applied
to the handpiece through the pressure of the footswitch or of the push button is to the handpiece through the pressure of the footswitch or of the push button is
not continuous. Each pressure of the switch conveys a single force pulse not continuous. Each pressure of the switch conveys a single force pulse
16:30 16:30 INGLESE.indd 9 INGLESE.indd 9
9 9
05/05/15 16:30 05/05/15 16:30