Operating Safety Guidelines - magnetic MALLET Mode D'emploi

5.6. Operating safety guidelines

5.6. Operating safety guidelines
Prior to your first treatment on a patient you should be cognizant on the working of this Prior to your first treatment on a patient you should be cognizant on the working of this
medical device. medical device.
Warning: Warning:
40 minutes break 40 minutes break
Warning: Prior to activating the device you should always carry a functional Warning: Prior to activating the device you should always carry a functional
operational test (F.O.T.) operational test (F.O.T.)
Warning: Instruments are not provided in a sterile package and must, Warning: Instruments are not provided in a sterile package and must,
therefore, be sterilised before their first use (see "Disinfection and sterilization of therefore, be sterilised before their first use (see "Disinfection and sterilization of
the parts" section) the parts" section)
Warning: Move away the device from the patient every time there is a stalling Warning: Move away the device from the patient every time there is a stalling
in the device working (for example: power failure) in the device working (for example: power failure)
Warning: Prior to activate the device make sure you have plugged into the Warning: Prior to activate the device make sure you have plugged into the
device the proper handpiece. device the proper handpiece.
: : Warning Warning
handpiece into the corresponding plug (M) and the footswitch in the corresponding handpiece into the corresponding plug (M) and the footswitch in the corresponding
plug (N). plug (N).
Warning:Handle with care the blades supplied with the beaver. Blades by Warning:Handle with care the blades supplied with the beaver. Blades by
nature are very sharp-edged. You should pay attention in inserting them into the nature are very sharp-edged. You should pay attention in inserting them into the
beaver. Do not insert beaver, with the blade coupled to it, into the handpiece, till the beaver. Do not insert beaver, with the blade coupled to it, into the handpiece, till the
starting of the surgery. Do not leave the handpiece coupled with the beaver and the starting of the surgery. Do not leave the handpiece coupled with the beaver and the
blade into the housing of the power supply. blade into the housing of the power supply.
Warning: make sure no liquids penetrate into the handpiece.
16:30 16:30 INGLESE.indd 15 INGLESE.indd 15
1 pulse/sec for a maximum of 200 consecutive pulses then a 1 pulse/sec for a maximum of 200 consecutive pulses then a
. Carefully read the specific Sterilization handbook.
: Prior to activate the device make sure you corerctly plugged the : Prior to activate the device make sure you corerctly plugged the
15 15
05/05/15 16:30 05/05/15 16:30