Electromagnetic Compliance Declaration - magnetic MALLET Mode D'emploi

12.0. ELECTROMAGNETIC COMPLIANCE DECLARATION

12.0. ELECTROMAGNETIC COMPLIANCE DECLARATION
Immunity test Immunity test
Electrostatic Electrostatic
discharge (ESD) discharge (ESD)
IEC 61000-4-2 IEC 61000-4-2
Electrical fast Electrical fast
Transient/Burst Transient/Burst
IEC 61000-4-4 IEC 61000-4-4
Surge Surge
IEC 61000-4-5 IEC 61000-4-5
Voltage Dips, Short Voltage Dips, Short
interruptions and interruptions and
voltage variations voltage variations
on power supply on power supply
input lines input lines
IEC 61000-4-11 IEC 61000-4-11
Power frequency Power frequency
(50/60Hz) magnetic (50/60Hz) magnetic
field field
IEC 61000-4-8 IEC 61000-4-8
16:31 16:31 INGLESE.indd 29 INGLESE.indd 29
IEC 60601 Test level IEC 60601 Test level
±8kV contact ±8kV contact
±2, 4, 8, 15kV air ±2, 4, 8, 15kV air
±2kV for input ±2kV for input
power ports power ports
±1kV for I/O ports ±1kV for I/O ports
Input power ports: Input power ports:
0.5 and 1.0kV (line to 0.5 and 1.0kV (line to
line) line)
0.5, 1.0 and 2.0kV (line 0.5, 1.0 and 2.0kV (line
to earth) to earth)
Signal I/O: Signal I/O:
2kV (line to earth) 2kV (line to earth)
Dips: Dips:
>95% UT for 0.5 and 1 >95% UT for 0.5 and 1
cycle cycle
30% UT for 25 cycles 30% UT for 25 cycles
(50Hz) (50Hz)
30% UT for 30 cycles 30% UT for 30 cycles
(60 Hz) (60 Hz)
Interruption: Interruption:
>95% UT for 250 cycles >95% UT for 250 cycles
(50Hz) (50Hz)
>95% UT for 300 cycles >95% UT for 300 cycles
(60Hz) (60Hz)
30 A/m 30 A/m
Compliance Compliance
level level
environment - guidance environment - guidance
Floors should be wood, Floors should be wood,
concrete or ceramic tile. concrete or ceramic tile.
Compliant Compliant
If floors are covered with If floors are covered with
synthetic material, the synthetic material, the
relative humidity should relative humidity should
be at least 30%. be at least 30%.
Mains power quality should be Mains power quality should be
Compliant Compliant that of a typical commercial or that of a typical commercial or
hospital environment. hospital environment.
Mains power quality should be Mains power quality should be
Compliant Compliant
that of a typical commercial or that of a typical commercial or
hospital environment. hospital environment.
Mains power quality should be Mains power quality should be
that of a typical commercial that of a typical commercial
or hospital environment. If the or hospital environment. If the
user of the device requires user of the device requires
continued operation during continued operation during
Compliant Compliant
power mains interruptions power mains interruptions
it is recommended that the it is recommended that the
device be powered from and device be powered from and
uninterruptible power supply uninterruptible power supply
or a battery. or a battery.
Power Power
fields should be at levels char- fields should be at levels char-
Compliant Compliant
acteristic of a typical location in acteristic of a typical location in
a typical commercial or hospital a typical commercial or hospital
environment. environment.
Electromagnetic Electromagnetic
frequency frequency magnetic magnetic
05/05/15 16:31 05/05/15 16:31
29 29