Maintenance; Repairs; Fuses Replacement - magnetic MALLET Mode D'emploi

8.3. Maintenance

8.3. Maintenance
Caution: Do not open the device! Electric shock danger! Any intervention on Caution: Do not open the device! Electric shock danger! Any intervention on
the device by unauthorized people nullifies the warranty. the device by unauthorized people nullifies the warranty.
NO LUBRICATION AND/OR MAINTENANCE IS NEEDED ON THIS DEVICE NO LUBRICATION AND/OR MAINTENANCE IS NEEDED ON THIS DEVICE
NO INTERVENTION ON THIS DEVICE IS ALLOWED. NO INTERVENTION ON THIS DEVICE IS ALLOWED.
In the event of any failure you should immediately contact the manufacturer/dis- In the event of any failure you should immediately contact the manufacturer/dis-
tributor (see section "Failures and malfunctions"). The only maintenance you can tributor (see section "Failures and malfunctions"). The only maintenance you can
carry out is the fuses replacement (see section "Fuses replacement"). carry out is the fuses replacement (see section "Fuses replacement").

8.4. Repairs

8.4. Repairs
Caution: Do not open the device! Electric shock risk! Any opening of this Caution: Do not open the device! Electric shock risk! Any opening of this
device by unqualified people nullifies the warranty. device by unqualified people nullifies the warranty.
Warning: FOR YOUR OWN SAFETY YOU SHOULD NOT MAKE ALTERATIONS Warning: FOR YOUR OWN SAFETY YOU SHOULD NOT MAKE ALTERATIONS
TO THIS DEVICE. TO THIS DEVICE.
IN THE EVENT OF FAILURES OR MALFUNCTIONS CALLING FOR REPAIRS YOU IN THE EVENT OF FAILURES OR MALFUNCTIONS CALLING FOR REPAIRS YOU
SHOULD PROMPTLY ADVICE THE MANUFACTURER/DISTRIBUTOR SO THAT THE SHOULD PROMPTLY ADVICE THE MANUFACTURER/DISTRIBUTOR SO THAT THE
DEVICE WILL BE CALLED IN. DEVICE WILL BE CALLED IN.
The distributor/manufacturer will carry out the failures test and the repair works. The distributor/manufacturer will carry out the failures test and the repair works.

8.5. Fuses replacement

8.5. Fuses replacement
Warning: You should replace fuses with some new one having the amper- Warning: You should replace fuses with some new one having the amper-
age value indicated in the rating plate on the fuse holder. age value indicated in the rating plate on the fuse holder.
1. Take off the fuse holder (I) from the line filter using a little screwdriver. 1. Take off the fuse holder (I) from the line filter using a little screwdriver.
2. In the fuse holder you will find two 1,6 A fuses. 2. In the fuse holder you will find two 1,6 A fuses.
3. Verify if one or both fuses are burnt out. 3. Verify if one or both fuses are burnt out.
4. Pull out the burnt out fuse/fuses. 4. Pull out the burnt out fuse/fuses.
5. Pull into the holder the new fuse/fuses. Make sure they have the same amper- 5. Pull into the holder the new fuse/fuses. Make sure they have the same amper-
age value indicated in the rating plate placed on the fuse holder. age value indicated in the rating plate placed on the fuse holder.
6. Verify the correct working of the device. 6. Verify the correct working of the device.
24 24
INGLESE.indd 24 INGLESE.indd 24 05/05/15 16:31 05/05/15 16:31 INGL INGL