Publicité
Les langues disponibles
Les langues disponibles
W 860 E
using the tool. Many accidents have their origin in power tools that have been
maintained badly.
f)
Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. Take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
a)
Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b)
If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
ATTENTION! EXPLOSION HAZARD!
Do not store materials with a flash point below 21°C in the basic device!
Only store materials in the basic device in containers that close airtight!
Remove any material that may have leaked into the basic device immediately
and allow the device to dry completely before using it! Do not store materials
contained solvents in the basic device during operation!
•
CAUTION!
Wear breathing equipment: Paint mist and solvent vapors are
damaging to health. Always wear breathing equipment and only work in
well ventilated rooms or using supplementary ventilating equipment. It is
advisable to wear working clothing, safty glasses, ear protection and gloves.
CAUTION:
•
The spray gun is to be used only for paints and solvents with a 21°C (32° in UK) flashpoint
or higher (See information on the material tin. Hazard class A II and A III permitted).
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents which have a flashpoint
under 21°C.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or artificial
ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
Danger of injury! Never point the spray stream towards
human beings or animals.
GB
15
Publicité
