Festo CMMP Serie Mode D'emploi page 22

Mounting
L1 = 369 mm
B1 = 83 mm
H1 = 263 mm
Note
Using the CMMP-AS motor controller only as an in-
stalled device for control cabinet assembly.
With the mounting plate, mount the CMMP-AS to the
control cabinet plate.
Vertical mounting position with the slots EXT1 and
EXT2 upward
Maintain a gap of 100 mm both above and below the
motor controller for fitting.
If the CMMP-AS is subjected to high temperatures, it
must be fastened with a mounting space (distance be-
tween holes) of 95 mm.
22
L2 = 329 mm
B2 = 41,5 mm
L3 = 12,5 mm
D1 = 11 mm
Festo P.BE-K-CMMP-AS-C20 1010NH English
L4 = 6 mm
D2 = 7 mm