Recording The Rts Transmitter; Mode Selection: Roller Or Tilting Mode; Favorite Position: My Position Recording My Position - SOMFY HOME MOTION Sonesse 40 RTS Notice D'installation

4.4 Recording the RTS transmitter

After recording the end limit:
Press briefly the programming button on the
back of the transmitter. The shade jogs.
The transmitter is recorded.
OR
1) Switch off the current.
2) Switch on the current. The shade jogs.
3) Simultaneously press the UP and DOWN
buttons on the RTS transmitter.
The shade jogs.
4) Press briefly the programming button on the
back of the transmitter. The shade jogs.
The transmitter is recorded.

4.5 Mode selection: Roller or Tilting mode

The Sonesse 40 RTS is designed to work with
®
2 modes: Venetian blind mode or roller blind
mode.
The Sonesse 40 RTS is set by default to work
®
in roller blind mode.
This feature allows the Sonesse
be set according to the type of blind you are
working with.
Move the shade away from the end limits.
1) Simultaneously press the UP and DOWN
buttons until the shade jogs.
2) Press and hold the MY and DOWN buttons
simultaneously until the shade jogs to change
from Roller mode to Tilting mode.
4.6 Favorite position: MY position
Recording MY position.
To set the MY position, move the shade to the
desired position with the UP and DOWN buttons
then press the MY button until the shade jogs.
6
1
3
1
40 RTS to
®
2
Copyright © 2011 Somfy SAS. All rights reserved - V0 - 06/2011
PROG.
2
4
PROG.