ENG
5.
Operation
Fig.12:Switches.
5.1
Switch-on and switch-off
Switching the indirect light on and off
X Presstheupperswitch,seeFig.12.
Switching the direct light on and off
X Pressthelowerswitch,seeFig.12.
5.2
Dimming
Thisfunctionisusedtochangethebright-
nessofthelight.
Dimming the indirect light
X Press the upper switch and keep it
depressed,seeFig.12.
After about one second, the light will
changeitsbrightness.
X Tochangethedimmingdirection,press
theswitchagainandkeepitdepressed.
This will save the set brightness.The
nexttimethelightisswitchedon,the
brightnesssavedlastwillbeset.
Dimming the direct light
X Press the lower switch and keep it
depressed,seeFig.12.
After about one second, the light will
changeitsbrightness.
X Tochangethedimmingdirection,press
theswitchagainandkeepitdepressed.
24
This will save the set brightness.The
nexttimethelightisswitchedon,the
brightnesssavedlastwillbeset.
5.3
Aligning the light head
Thelightheadcanberotatedby180°.
Fig.13:Aligningthelighthead.
X RotatethelightheadAarounditsown
axis,seeFig.13.
5.4
Aligning the direct light
optics
B
Fig.14:Aligningthedirectlightoptics.
NOTE: A notch in each wheel B indi-
catesthedirectionintowhichthedirect
lightisdeflected.
X RotatethewheelsB,seeFig.14.
ThiswillrotatetheopticsAanddeflect
thedirectlight.
Operation
A
A