Positioning - Waldmann SIRA DTS 12/D Mode D'emploi

ENG
X RemovethecoverEfromthelighthead, 
seeFig.8.
Fig.7:Connectingthelighthead.
NOTE:Thetwosmallplugsinthelight
head are non-interchangeable.Their
functionisguaranteedevenwhenthe
plugsareswapped.
X Plugthelargeplugandthetwosmall 
plugsintothematchingsocketsinthe
lighthead,seeFig.7 .
F
Fig.8:Mountingthecover.
X Place the cover E on the light head, 
seeFig.8.
X Fasten the cover using the delivered 
screwsF.
22
3.

Positioning

Fig.9:Positioningexample(topview).
No. Designation
A Window
B Workarea
C
Light
X Positionthelightsuchthatthelargest 
possibleareaoftheworkareaislit.
X Forthealignmentofthelighthead,see 
chapter 5.3 "Aligning the light head" ,
page24.
X For the alignment of the direct light 
E
optics, see chapter 5.4"Aligning the
directlightoptics" ,page24.
Positioning
A
B
C