Equipment Setup And Use; Prior To Use; Setup - AMATECH F-70400 Instructions D'utilisation

INSTRUCTIONS FOR USE
3

Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that
could be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped
dry prior to each use.

Setup:

Step 1:
 Place the Supine Access Top
on the Spine System.
 Orient latch away from the
operative sight.
 Install Spine Frame Accessory
Rails in the cutouts of the
Supine Tops.
 Install
retractors onto the Accessory
Rails.
Step 2: (For System Set-up Only)
 Place four Spine Frame Supine
Tops on the Spinal Frame as
illustrated.
 Orient
operative sight.
 Install Spine Frame Accessory
Rails in the cutouts of the
Supine Tops.
 Armboard Rails and Armboards are
recommended to support the arms.
Step 3:
 Attach Supine Top Pads.
Document Number: 80024700
Version: B
Armboards and/or
Latches away from
Page 12
Accessory Rails
can be installed
in this area
Latches oriented away from the
operative sight.
Ref Blank Template: 80025118 Ver. E
Operative Sight
Issue Date: 25 MAR 2020