Timer Control; Connecting The Timer Control; Lay Out Control; Functions Control - Renson Cube Manuel

Cube
®
EN
9.2 • Timer control
9.2.1 • Connecting the Timer control
See section 9.1.3.3.4 for connecting the Timer control.
9.2.2 • Lay out control
9.2.3 • Functions control
138
Display
The Timer control has 1 display and 3 buttons.
The Timer control can be used to set a time interval during which
the ventilation system will ventilate at its maximum capacity
(Boost). Once activated, the Timer control overrules the current
ventilation program.
The functionality of the main control is temporarily turned
inactive when the Timer control gets activated (blinking colon on
the display) and the ventilation level will be turned up to level 4.
The main control will be locked which will be indicated with a
key symbol on the TouchDisplay and the blue blocks indicating
the ventilation intensity will turn red.
(also see section 9.1.3 'Control functions')
Button 1
Button 2
Button 3