Renson Cube Manuel page 127

3
4
5
In order to leave the Installer menu 'Connect remotes',
hold ■ for 3 seconds or simultaneously tap ▼ and ▲.
The following screen appears. The main control will now try to
disable the connection ("Removing" appears at the bottom line
of the screen). The process will be cancelled if ■ is pressed.
Now press button ➀ and ➁ on the timer control simultaneously.
'Ln' appears on the screen of the Timer control.
It will now try to disconnect for 20sec.
'E01' will appear for a few seconds if the process fails.
Repeat the previous steps and try to disconnect once again.
The following screen appears after a successful disconnection
and the screen of the timer control will be cleared.
Cube
®
EN
127