Renson Cube Manuel page 126

Cube
®
EN
4
5
B) Removing Timer control
1
2
126
Now press button ➀ and ➁ on the timer control simultaneously.
'Ln' appears on the screen of the Timer control.
It will now try to connect with the main control for 20sec.
'E01' will appear for a few seconds if the connection fails.
Repeat the previous steps and try to connect once again.
The following screen will appear if the connection was
successful.
In order to leave the Installer menu 'Connect remotes',
hold ■ for 3 seconds or simultaneously tap ▼ and ▲.
Select 'Connect remotes' in the Installer menu and confirm with ■.
'Add remote' lights up.
Switch to 'remove remote' with ▼ and confirm with ■.