Burkert 1062 Notice D'utilisation page 9

Type Version
Plug PG
1062 • •
•
•
•
•
• •
1062
Carefully place body
guiding piece , rotate into
required direction and fix with
grub screw .
Remove cover .
Pull cable through PG
cable gland , strip external
cable insulation 100 mm
and connect according to
wiring diagram.
Install cable into guide on bottom of body
Fasten PG cable gland
Unscrew cover fasten the screws.
Label specification tag
Stroke must not be adjusted (self-adjusting).
In case the position feedback indicator in operation
should be changed to another valve, set the lower
trip cam to the high of 33.5 mm.
POSITION FEEDBACK 1062
upon
.
Green
.
-9-
.
Red
Yellow