Socket For Software Upgrade - PERFECTPRO DAB+BOX2 Mode D'emploi

Socket for software upgrade

From time to time, new software features for your radio may be developed. Your radio has
therefore been designed to allow its internal software to be updated using your USB upgrade
port.
You should not attempt to update your radio unless it is recommended to you by Perfectpro
Customer Services. Updating the software may remove all radio station presets and settings
from your radio.
Software updates for your radio may be available in the future.
As software updates become available software and information on how to update your radio can
be found at:
www.perfectpro.eu
For more information, please contact our Head Office by sending an email to info@perfectpro.eu
1. Using the micro USB cable (not supplied) to connect the USB socket in the battery
compartment and your PC.
2. With your radio switched on, press and hold the Info/Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to select "System" and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select "Software Upgrade" and press the Tuning control
knob to enter the setting. The default setting is "No". Otherwise, rotate the Tuning control
knob to choose "Yes" and press the Tuning control knob. The display will show 'Waiting for PC
wizard'.
5. Go to the website above to download the latest software. Follow the on-screen instructions on
your PC provided with the upgrade software to complete the software upgrade.
6. If you do not wish to carry out a software upgrade, rotate the Tuning control knob to choose "No"
in step 4 and press the Tuning control knob.
Note:
Please use AC power cord as main power when upgrading software.
Do not switch off the power to the radio until the update operation is complete and the radio has
restarted, otherwise the unit may become permanently damaged.
FM
<System
2
System
<Software Upgrade >
Upgrade?
3,4,6
Yes <No>
GB
>
33