Aux In Socket - PERFECTPRO cubi Mode D'emploi

Aux In Socket

There are 2 Aux In sockets in this radio to connect other audio
sources like MP3 player or computer to listen to the audio program
via the speakers of this radio.
Aux In-1 is located on the side while Aux In-2 is located inside the
storage compartment.
Remove the rubber cover (Aux In-1) and connect the audio source
with a 3.5 mm audio connector wire.
GB
Release the battery compartment locker and pull down the cover to
find Aux In-2 socket, connect the audio source with a 3.5 mm audio
connector wire.
When radio is on, repeatedly press and release SOURCE button to
select AU 1 (Aux In-1) or AU 2 (Aux In-2), rotate the volume control
to play the audio program.
Make sure the Aux In-1 rubber cover on the side is closed well
after use to prevent moist and dirt from entering the radio.
24