Factory Reset - PERFECTPRO DAB+BOX2 Mode D'emploi

Factory reset

If your radio fails to operate or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the current mode.
3. Rotate the Tuning control knob to select "System" and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select "Factory Reset" and press the Tuning control knob to
enter the setting.
5. Rotate the Tuning control knob to highlight "Yes" to proceed. If you do not wish to carry out a
system reset, highlight "No" and then press the Tuning control knob to confirm the setting.
6. With "Yes" highlighted, press the Tuning control knob. A full reset will be performed. All presets
and station lists will be erased. All settings will be set to their default values. After a system re-
set, the radio will be restarted. The display will show "Welcome to Digital Radio" and a scan of
the DAB band III will be performed.
In case of malfunction due to electrostatic discharge, reset the product (reconnection of power
source may be required) to resume normal operation.
32
FM
<System
1
System
<Factory Reset
2
Factory Reset?
Yes <No>
3-6
>
>