PERFECTPRO DAB+BOX2 Mode D'emploi page 26

Playing audio files in Bluetooth mode
When you have successfully connected your radio with the chosen
Bluetooth source device you can start to play your music using the
controls on your connected Bluetooth device.
1. Once playing has started adjust the volume to the required setting
using the Volume control on your radio or on your enabled Bluetooth
source device.
2. Use the controls on your Bluetooth source device to play/pause and
navigate tracks. Alternatively, control the playback using Play/Pause
( ), Next track ( ), Previous track buttons (
3. Press and hold the Fast-forward/Rewind button to move through the
current track. Release the button when the desired point is reached.
Note:
Not all player applications or devices may respond to all of these
controls.
Playing a previously-paired Bluetooth source device
The DAB+BOX2 can memorize up to 2 sets of paired Bluetooth source
devices, when the memory exceed this amount, the earliest paring
device will be over written from the device.
If your Bluetooth source device already paired with the DAB+BOX2
previously, the unit will memorize your Bluetooth source device and
it attempts to reconnect with a Bluetooth source device in memory
which is last connected. If the last connected Bluetooth source device
is not available, the DAB+BOX2 will try to connect to the second last
Bluetooth source device.
) on your radio.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3 seconds to
disconnect with your Bluetooth device. You can also press the Source
button to select any mode other than Bluetooth mode or turn off
Bluetooth on your Bluetooth source device to disable the connection.
If you disconnect the Bluetooth device when you are in Bluetooth mode,
the "Bluetooth Pairing" will show on the display, indicating Bluetooth is
available again for pairing.
GB
25