Maintenance And Cleaning - BH LK700WS Guide D'utilisation

GROUNDING INSTRUCTION
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this product.

MAINTENANCE AND CLEANING

Care has been taken to assure that your equipment has been properly adjusted and
lubricated at the factory. It is not recommended that the user attempt service on the internal
components. Instead, seek service from an authorized service center. However, you may
clean the outer surface. Use a soft cloth, dampened with warm water. Do not use aerosol
sprays or pump bottles as they may deposit sediments upon the console surface. The use
of harsh chemicals will destroy the protective coating and cause a static build-up that may
damage the some of the components.
MACHINE INFORMATION AND RECOMMENDATION
• It is recommended that the machine run on a 15-20 A, 110-120 V dedicated circuit.
• Equipment must be connected to electrical circuits with an earth/ground connection. If
not, the user risks receiving an electric shock.
• Treadmills are not compatible with GFCI (Ground Fault Circuit Interrupt) plugs.
• Each machine has a breaker that will engage at 15 Amps.
• Power cord length is 72 inches (6ft)
23
LK700WS v.2