BH LK700WS Guide D'utilisation page 21

MOVING INSTRUCTION
Please make sure that the following are achieved before moving the treadmill:
A. The power of treadmill is turned off.
B. Remove the plugs from the socket.
C. Remove the communication wire connected to the treadmill.
Lift up the end of the treadmill and roll it backwards away from the desktop assembly.
Move the desktop assembly to the appropriate location (suggest using two people). Once the desktop
assembly is where you want it, lift the up the end of the treadmill and roll it over to the desktop. Align
the brackets of the treadmill with the guides on the desktop and lower to treadmill onto the guides. Once
secure, plug in the power sockets and the communication wire. Move complete.
Sliding Backwards
Lift this end
21
LK700WS v.2