BH LK700WS Guide D'utilisation page 18

STEP 4: ALIGNING THE TREADMILL
Take the Treadmill (1) and lift up at the rear of the deck. Align Bracket (A) with the
Bracket Guide (B) and slowly lower the Treadmill (1) onto the Bracket Guides. Make sure
both Brackets( A) align with the Bracket Guides (B) on both sides.
B
STEP 5: CONNECTING THE TREADMILL
The Communication Wire (16-1) and the Power Wire (14-1) should be installed in
the Cable Management (17-1) sleeve. Connect the Communication Wire (16-1) to
Communication Wire Port on the treadmill and on the bottom of the desktop. Once
connected secure the screws on both sides of the plug by hand. (See Diagram on pg. 19)
Communication
Wire Port
Power Switch
18
A
Sliding forward
1
A
Communication Wire (16-1)
Lift up
LK700WS v.2