BH LK700WS Guide D'utilisation page 26

DESKTOP INCLINE AND DECLINE TEST:
When the treadmill is in standby mode, press ""and "1" buttons at the same time for 3 seconds. The
desktop will automatically rise up to the top position, then decline to lowest position. (Remark: this
function will help you to find the top and lowest position of table)
BH DUALKIT INSTALLATION
1. To Access iConcept compatible apps, an optional (purchased separately) BH DualKit Module is
required.
INSTALLATION:
1.) There should be a blue square on the front of the console that says "DualKit". This is where the
DualKit Module plugs in.
2.) Make sure the USB part is extended from the module.
- Push up on the sides of the DualKit Module (Fig. 1)
- The USB should extend out of the bottom of the module (Fig. 2)
3.) Push the module in the USB slot on the front of the console (Fig. 3)
Fig. 1
26
Fig. 3
Fig. 2
Insert Here
LK700WS v.2