BH LK700WS Guide D'utilisation page 17

STEP 3: INSTALLING THE CONSOLE
To install the Console (9-1) slide it onto the right side of the Desktop (8-1). There are 2
small posts on the bottom of the Console (9-1) that aligns with 2 holes in the Desktop
(8-1).Lift up Slightly on the front of the Console (9-1) and slide forward until the posts
on the bottom of the Console (9-1) seat into the holes on the Desktop (8-1). Once the
console (9-1) is seated, secure with 2 Screws (30-13) and 2 Flat Washers (30-28) and 2
Phillip Screws (16).
Connect the 3 communication lines from the Console (9-1) to the Desktop (8-1). Install
the Cable Cover (8-4) over the wires and use 2 pcs Phillips Screw (30-21) to secure the
Cable Box (8-4). See picture (A-1) of isntalled Cable Box below.
30-28
30-13
8-4
9-1
30-21
Fig (A-1)
17
LK700WS v.2