BH LK700WS Guide D'utilisation page 27

USB CHARGING PORTS
The machine is equipped with 2 USB charging ports on the back of the console.
Note: Do not try to insert a Bluetooth module into the USB charging ports it could cause damage.
CHANGING SPEED FROM MILES PER HOUR TO KILOMETERS PER HOUR
Pull out the safety key, press the "SPEED+" and "SPEED-" keys at the same time for 5 seconds. If the
max speed is 4mph then the speed is in MPH. If the max speed is 6.5 the speed is in KPH.
TREADMILL ERP SLEEP FUNCTION
When the treadmill is in standby mode and is not used for 4 minutes and 30 seconds, the computer will
automatically turn off. Press any key to restart the console, your data will be retained.
Press both "MODE" button for 3 seconds to turn this function on/off. When you hear a long beep and
the screen shows "2222", this function is on, when you hear a short beep and the screen shows "1111",
this function is off.
MANUAL MODE:
1. How to access manual mode:
A.Turn on the switch, access the manual mode directly.
B.When the treadmill is in standby, press the "M" button to choose manual mode.
2. There are three settings in manual mode: time setting, distance setting and calorie setting. You can
choose one function to countdown. The last function you have set will countdown, the other fuctions
will operate normally.
A. When you access the manual mode, the screen show time: 0:00
B. When you press the "M" button, choose the countdown function, the time window is flash,
the default time is 30:00 minutes. Press Speed + and Speed – to adujust the time. The time
range is 5:00-99:00 minutes.
C. In the time countdown function, press the "M" button to access the calorie countdown
function. The default calorie is 50 kilocalories, you can press the Speed + and Speed – to adjust
the calories. The calorie set range is 10-9990.
D. In the calorie countdown function, press the "M" button to access the distance countdown
functio. The default distance is 1.0km or 1 mile, you can press the Speed + and Speed – to
adjust the distance. The distance set range is 1.0-99.0.
3. Manual program operation instruction:
A. Press start button, the treadmill starts and the time counts down, the initial speed is .3mph or .5kph.
B. Press the Speed + and Speed – to adjust the speed.
C. When treadmill is working, press the Stop button, the treadmill will stop.
D. Pull off the safety key, the treadmill will stop and the console will display E07.
E. When the time countdown reaches 0, the speed reduces slowly until stopped.
F. When the distance countdown reaches 0, the speed reduces slowly until stopped.
G. When the calorie countdown reaches 0 the speed reduces slowly until stopped.
27
LK700WS v.2