Tips And Advice On Operation; Technical Data - SOMFY MAESTRIA+ 50 RTS Notice

3. 6. TIPS AND ADVICE ON OPERATION

3. 6. 1. Questions about the drive?
Observations
The driven product
does not operate.
If the driven product still does not operate, consult a home motorisation and automation professional.
3. 6. 2. Obstacle detection
Obstacle detection is operational only with compatible driven products. Consult a home motorisation and
automation professional to find out which products are compatible.
Automatic obstacle detection can be used to protect the driven product and remove any obstacles.
• If the driven product encounters an obstacle when moving downwards, the driven product stops automatically
and raises slightly so the obstacle can be removed.
• If the driven product encounters an obstacle when moving
upwards, the driven product stops automatically.
3. 6. 3. Frost protection
Frost protection functions in a similar way to obstacle detection:
• If the driven product detects any resistance, it stops automatically.
3. 6. 4. Adding/Deleting Somfy RTS control points and sensors
Refer to the corresponding guide.
3. 6. 5. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, consult a home motorisation and automation professional.

4. TECHNICAL DATA

Radio frequency
Power supply
Operating temperature
Protection rating
Maximum number of connected RTS control points
Maximum number of connected RTS sensors
Safety level
Copyright © 2017 Somfy SAS. All rights reserved.
Possible causes
The drive's overheating protection has tripped.
The Somfy RTS control point battery is low.
Wait for the drive to cool down.
Check the battery and replace it as
required.
433,42 MHz
120 V 60 Hz
-4 °F à +158 °F
IP 44
12
3
Category I
Non contractual images
EN
Solutions
13