SOMFY MAESTRIA+ 50 RTS Notice page 6

EN
E1. MANUAL ADJUSTMENT OF THE UPPER END LIMIT AND THE LOWER END LIMIT
1) Position the driven product at its half-way position.
2) Press the "Up" button: the driven product raises.
3) Press "my" to stop the driven product at the upper end limit position
(if necessary, adjust the position of the driven product using the
"Up" or "Down" buttons).
4) Press the "my" and "Down" buttons simultaneously: the driven
product lowers.
5) Press "my" to stop the driven product at it's half-way position.
6) Press the "Down" button: the driven product lowers.
7) Press "my" to stop the driven product at the lower end limit position
(if necessary, adjust the position of the driven product using the
"Up" or "Down" buttons).
8) Press the "my" and "Up" buttons simultaneously: the driven product
raises.
9) Press "my" to stop the driven product.
10) Press "my" until the driven product moves up and down briefly to
validate the end limit setting.
E2. MANUAL ADJUSTMENT OF THE LOWER END LIMIT AND AUTOMATIC ADJUSTMENT OF THE UPPER END LIMIT
1) Position the driven product at its half-way position.
2) Press the "Down" button: the driven product lowers.
3) Press "my" to stop the driven product at the lower end limit position
(if necessary, adjust the position of the driven product using the
"Up" or "Down" buttons).
4) Press the "my" and "Up" buttons simultaneously: the driven product
raises.
5) Press "my" to stop the driven product.
6) Press "my" until the driven product moves up and down briefly to
validate the lower end limit setting.
A er pressing "my", the upper end limit is adjusted automatically.
E3. END LIMIT AUTOMATIC SETTINGS
1) Position the driven product at its half-way position.
2) Briefly press the "Up" and "Down" buttons simultaneously: the
driven product moves up and down briefly.
3) Press the "Down" button: the driven product lowers until it detects
the lower end limit, performs a brief upward movement and returns
to its lower end limit position.
4) To validate the setting, press the "my" button until the driven
product moves up and down briefly.
If the lower end limit is not set automatically a er several attempts,
restart the setting and perform the step
6
E2
.
Non contractual images
1)
3)
5)
7)
9)
1)
3)
5)
1)
3)
4)
Copyright © 2017 Somfy SAS. All rights reserved.
2)
4)
6)
8)
10)
2)
4)
6)
2)